Grain Bruiser for high-output processing of traditional flat-rolled grain

The KC Bruiser 1250 and 600 are dedicated to the high-output production of traditional, flat-rolled grain for home-grown cereal blends and crimping. The 600mm diameter flat rollers will process any grain and can be very easily adjusted to produce the exact quality of roll required for any situation.

Bruiser 600 for flat rolled grain

KC Bruiser 600

Depending on the type, quality and moisture content of the grain, the KC Bruiser 1250 can achieve outputs from 15 – 40 tonnes/hour, and the smaller KC Bruiser 600 will process from 7 – 20 tonnes/hour.

Bruiser 1250 for flat rolled grain

KC Bruiser 1250

The Bruiser range embraces the design, performance and reliability values widely associated with Kelvin Cave Ltd’s established range of Murska and Korte crimping machines.  Initially developed to produce the flat-rolled grain commonly found in cereal blends and home mixes, the latest models of KC Bruisers will process grain with moisture contents up to 45%  for crimping and ensiling, as well as dryer grain for aerobic storage. All models feature magnet protection to remove ferrous metal debris from grain, a tough marine quality paint for long-life protection and can be equipped for grain preservative application.

Both models can be fitted with the unique Kelvin Cave Ltd, on-board, digital weighing system, making them ideal for contractors who have to deal with unknown quantities of grain at different locations.  These weighing systems also ensure greater application accuracy when preservatives are being added during processing.

Supplied mounted on robust trailer-chassis as standard, bespoke options to suit specific requirements are available to special order. The Bruiser 1250 below is a twin axle version with an extended chassis capable of carrying up to 2 IBC’s of preservatives. This model, as shown below, is fitted with air brakes and the specification allows road speeds up to 50kph giving larger farm and contracting operators even greater efficiency and productivity.

Bruiser 1250 in a twin axle version with an extended chassis

You may also be interested in:

Moist grain treatment with Propcorn NC

Moist grain treatment with Propcorn NC

Latest news

The silage six pack – For perfect silage, every time

In a year that has seen extreme weather conditions across much of Britain, livestock feeding has become a real challenge,...

Read more

No place for waste with this year’s maize silage

Every year brings its challenges and, so far, 2018 has been more challenging than most! You probably don’t need reminding...

Read more

Preserving the most from this autumn’s grass silage harvests

Dr Dave Davies, Silage Solutions Ltd considers how to get the most from this autumn's silage harvests On most farms...

Read more

Machinery Matters

  Maintenance, repair, refurbishment, new-build, bespoke … With our own comprehensive workshop facilities, we’ll show you how easy it can be...

Read more

Arable farmer ditches combine in favour of forage

A Yorkshire farmer has turned a difficult situation following this summer’s drought to everyone’s advantage in a move which could...

Read more

Cereal harvest begins in Devon in mid-June

The combine was out last Friday afternoon (15 June) in Cullompton, Devon where beef and arable farmer, Roger Adams, has...

Read more